Skip to content
Menu
The Rig
  • Blog
  • Build Plan
  • ToDo
  • Gallery
  • Resources
  • About
The Rig

Category: Cleaning

Grab Rails

Posted on February 14, 2024June 14, 2024 by Michael Kurt

My truck came equipped with six aluminum tube grab rails of various lengths and shapes. There were an angled pair on the back doors, one on the side door as well as two, two foot straight handrails mounted to the ceiling and a single six foot rail just above the squad bench. These were in…

+

Horns of Plenty

Posted on January 11, 2024June 12, 2024 by Michael Kurt

You may have noticed the big shiny chrome trumpets on the front fenders. These are emergency air horns, which are similar to truck and train horns except they apparently have a different tone, designed to be even more annoying and attention-grabbing with what the manufacturer dubs “Stuttertone”. They’re made by a company in Los Angeles…

+

Finishing Touches

Posted on March 18, 2023March 20, 2023 by Michael Kurt

There is a seemingly endless number of things to polish on the truck and the more I polish the more things I find that need polishing. By far, the biggest time suck has been the 78 light heads on the exterior of the vehicle. My original intent was to leave this task until much later,…

+

Wax On, Wax Off

Posted on November 3, 2022 by Michael Kurt

Besides the window polishing, I’ve also been polishing the many, many plastic lenses covering the various emergency strobes, turn signals, scene, reverse, brake and intersection lights spread all over the truck. Some of these were in okay condition, but many of them were over-tightened resulting in stress cracks and most have fogging from sun damage….

+

Dolt on the Roof

Posted on February 26, 2022February 27, 2022 by Michael Kurt

While I wait for my solar panels I’ve been cleaning up the module roof from the damage done by the old A/C housing guard. Most of it was scratches and a yellowing of the paint where debris accumulated. There were also a couple of inexplicable deep gouges toward the rear that I wanted to at…

+

Speed Holes

Posted on February 22, 2022February 22, 2022 by Michael Kurt

Today I spent a couple of hours removing sealant from three holes in the cab roof. I’m not sure what these holes were used for, but I’m guessing it was various types of antenna. They were definitely added after the ambulance was delivered because they are absolute butchery as far as putting a hole in…

+

Glass Polishing

Posted on February 13, 2022March 7, 2022 by Michael Kurt

Yet another issue I had to deal with is water spots on windows. While this seems like a trivial problem, it turned out to be anything but as these are the water spots from hell. I initially washed the inside and outside of all the windows thinking it was just built-up grime from sitting outside…

+

Recent Posts

  • A Brief Intermission While The Entire $&*@%! Engine Is Replaced
  • In with a Roar, Out with a Whimper
  • The Dreaded EGR
  • It Blows
  • Grab Rails

Archives

  • September 2024
  • May 2024
  • April 2024
  • March 2024
  • February 2024
  • January 2024
  • December 2023
  • November 2023
  • October 2023
  • September 2023
  • August 2023
  • July 2023
  • May 2023
  • March 2023
  • January 2023
  • December 2022
  • November 2022
  • October 2022
  • August 2022
  • July 2022
  • June 2022
  • May 2022
  • April 2022
  • March 2022
  • February 2022
  • January 2022
  • December 2021
  • November 2021

Categories

  • Cleaning
  • Conversion
  • Electrical
  • Engine
  • Fabrication
  • Maintenance
  • Plumbing
  • Travel
  • Troubleshooting
  • Uncategorized
©2025 The Rig | Powered by Superb Themes